24) Single-Ply Roofing Membranes
$13.95
The Science and Technology
of Traditional and Modern
Roofing Systems
by: Dr. H. Laaly
We provide several formats for the Table Of Contents for aiding searching or download speed. An “Expanded TOC” lists the chapter contents. Each chapter can have up to 31 Sections, and a Section can have up to 30 Sub-Sections.
- Chapter Names Only
- Suitable for keyword searching, Use the browser menu bar item Edit-Find to locate matching works. Example: Search on word install to find installation roofing instructions for over 40 types of roofs.
- “Expanded TOC” for Volumes One and Two on separate web page Just because we could. We advise searching the combined one above.
- “Expanded TOC” one web page per Chapter
Expanded Table of Contents
Chapter Name | Pgs |
24) Single-Ply Roofing Membranes | p. 40 |
Introduction | p. 1 |
Workmanship | p. 1 |
Why Single-Ply: An Historical Perspective | p. 1 |
The Evolution of Building Design | p. 1 |
The European Experience | p. 1 |
Technical and Economical Factors | p. 1 |
Energy Factors | p. 1 |
Labor: Is BUR a Dirty Word? | p. 1 |
Bur Battles Back | p. 1 |
polymer Chemistry And Single-Ply | p. 1 |
Thermosetting vs. Thermoplastic | p. 1 |
Single Ply Classifications | p. 1 |
Modified Bitumens | p. 1 |
prefabricated and Reinforced | p. 1 |
Hot Applied Rubberized Asphalts (RA) | p. 1 |
Cold Applied Liquid Membrane (CLM) | p. 1 |
Thermosets (Elastomers) | p. 1 |
Thermoplastics | p. 2 |
Liquid Applied Systems | p. 1 |
Single Ply And System Design | p. 2 |
The Ballasted System | p. 1 |
The Adhered System | p. 1 |
The Mechanically Attached System | p. 1 |
A Basis For Selecting Roofing Membranes | p. 1 |
Criteria For Selecting A Single-Ply For Your Roof System | p. 1 |
Structural Considerations | p. 1 |
Deck Composition | p. 1 |
Load Bearing Capacity | p. 1 |
Deck Penetrations | p. 1 |
Wind Uplift and Climatic Variables | p. 1 |
Chemical Environment | p. 1 |
Roof Access | p. 1 |
Aesthetic | p. 1 |
Building Codes and Costs | p. 1 |
pinpointing Problems With Single-Ply | p. 1 |
project Pinpoint was initiated by the NRCA in 1974. | p. 1 |
Lap Defects | p. 1 |
Shrinkage | p. 1 |
Tear and Punctures | p. 1 |
Delamination | p. 1 |
Insulation | p. 1 |
Other Problems with Single-Ply | p. 1 |
Distribution of Problems | p. 1 |
problems With Moisture And Single-Plies | p. 2 |
Single-Ply Alerts For Further Consideration | p. 1 |
Design | p. 1 |
Field | p. 2 |
Conclusion | p. 1 |
Manufacturers of Single-ply, BUR or Both | p. 4 |
References And Further Reading | p. 11 |
Reviews
There are no reviews yet.